I ordered a complete pre-wired sentence of measuring devices and received a do-it-yourself set. When I called the manufacturer, they said that the box was marked incorrectly and they sent the right one and gave it back.
7 days later I received the set of wiring and a complete measuring device together with the senders.
The advertising and the instructions said that it was a direct fit and everything I had to do was wiring the 12-pin plug/braid into the painless cable kit.
The cabling of the braid tartl went well after all wires were the ID because there were several spare parts or no used wires. Then when I tried to insert the panel, it would not be flush on the dashboard.
The dashboard and the steering column support disturbed the wiring and the back of the tachometer and the tachel. The cabling was moved and reorganized to clarify, but the Speedo & Tach holders were too deep to clarify the support. I cut the long machine screws on the back of the Speedo \ Tachs, but still had to bend the support so that it can be set flush.
The dashboard is now complete and you can (below) see that the dashboard lights work. The windshield wiper switch was bought separately and the wardrobe and the windshield wipers actually work 92 speeds).
In addition to the parts delivered by car, the front fenders were next on the agenda because there are many missing parts.
The bumper supports were with the 2 smaller brackets that I have not yet found out where they go, painted and painted with pearls.
The headlight lights were screwed on the spot after the hardwear and screws were found on the spot.
The front roll pan with parking lights and gravel pan went next. The bumper was the last piece I have so that the entire grill assembly has to be bought.
The taillights, brake lights and rotation all signal.
Slights (HI and bending beams) work together with parking / turning lights.
Thelights.
The front bumper is new and looks good.
The car now has a good attitude because the front has been lowered with a 2 “rake. I have to wait a while to order more parts until our budget allows it, since the measuring devices were 1,000.00 US dollars.
