thyssenkrupp Metal provides low-CO2 bluemint metal for truck wheels for first time


thyssenkrupp Metal is supplying low-CO2bluemint” metal to its buyer Accuride for the manufacturing of truck wheels. To enhance the carbon footprint of the wheel for the client Accuride, a number of parameters in flat metal manufacturing have been optimized with regard to sustainability.

In contrast with standard metal, bluemint Metal used for sustainable wheel manufacturing presents emission financial savings of 70% as much as the new strip manufacturing stage. This climate-friendly impact is achieved through the use of Sizzling Briquetted Iron (HBI; direct lowered iron (DRI) in briquetted type, earlier put up)—pre-reduced iron ore—within the blast furnace. This permits much less coal for use for the discount course of, leading to lowered emissions.


bluemint Metal is a flat metal product which doesn’t have any impact on the stability of Scope 3 (upstream chain) emissions on the Duisburg web site. These are all emissions that happen through the manufacturing and transport of the enter supplies. On this method, the CO2 depth of every metric ton is lowered by 1.5 metric tons, to 0.6 metric tons. This calculation methodology in addition to the produced amount of bluemint Metal has been confirmed by the worldwide certifier DNV.

A metal with the next power is used, which allows a decrease sheet thickness with the identical efficiency. This light-weight development impact makes for a weight saving in comparison with standard wheel metal, resulting in decrease gasoline consumption within the utilization section.

This permits a double CO2 saving: through the metal manufacturing and through your complete utilization section of the wheel. Taken collectively, this quantities to greater than 10% over your complete lifecycle with a mileage of 1,200,000 km.

The load-optimized bluemint wheel may also rating factors by way of sustainability in comparison with a a lot lighter cast aluminium wheel of the identical dimension.

thyssenkrupp already presents its clients CO2-reduced and authorized steels on the premise of its tkH2Steel transformation idea. To this finish, varied alternatives for CO2 discount are being exploited throughout the present know-how framework. The decisive step in the direction of climate-neutral metal manufacturing would be the development of hydrogen-based direct discount vegetation. The primary plant is scheduled to go on stream in Duisburg in 2026. Manufacturing of 5 million metric tons of low-CO2 metal is already deliberate for 2030.


Leave a Comment